Architectural control of polystyrene physical properties using branched anionic polymerization initiated at ambient temperature

Ambient temperature-initiated anionic polymerization has generated branched polystyrenes of varying molecular weights and architectures by inclusion of a distyryl branching comonomer into a conventional sec-Butylithium-initiated polymerization of styrene. Primary chain length control within the branched polymers, and restriction of the branching points to varying segments of the primary chains, led to variations of glass transition temperature with no direct correlation to the branched polymer molecular weight but a strong relationship to the length of individual chains comprising the branched macromolecules.     

Preparation of polymethyl methacrylate with well-controlled stereoregularity by anionic polymerization in an ionic liquid solvent

This study investigates the effect of ionic liquids (ILs) on the anionic polymerization of methyl methacrylate (MMA). Polymethyl methacrylate (PMMA), an isotactic polymer, is prepared by anionic polymerization at a high reaction temperature with an IL that acts as both solvent and additive. The most plausible reaction mechanism is determined using ¹H NMR and Fourier-transform infrared spectroscopy. The electrostatic interaction between MMA and the IL increases the apparent steric hindrance in MMA, resulting in the isotactic PMMA.     

In Situ Metal-Assisted Ligand Modification Induces Mn4 Cluster-to-Cluster Transformation: A Crystallography,Mass Spectrometry,and DFT Study

Dehydration of (S,S)-1,2-bis(1H-benzo[d]imidazol-2-yl)ethane-1,2-diol (H₄L) to (Z)-1,2-bis(1H-benzo[d]imidazol-2-yl)ethenol) (H₃L′) was found to be metal-assisted, occurs under solvothermal conditions (H₂O/CH₃OH), and leads to [Mn^II₄(H₃L)₄Cl₂]Cl₂ ⋅ 5 H₂O ⋅ 5 CH₃OH ( Mn₄L₄ ) and [Mn^II₄(H₂L′)₆(μ₃-OH)]Cl ⋅ 4 CH₃OH ⋅ H₂O ( Mn₄L′₆ ), respectively. Their structures were determined by single-crystal XRD. Extensive ESI-MS studies on solutions and solids of the reaction led to the proposal consisting of an initial stepwise assembly of Mn₄L₄ from the reactants via [MnL] and [Mn₂L₂] below 80 °C, and then disassembly to [MnL] and [MnL₂] followed by ligand modification before reassembly to Mn₄L′₆ via [MnL′], [MnL′₂], and [Mn₂L′₃] with increasing solvothermal temperature up to 140 °C. Identification of intermediates [Mn₄L_xL′_6−x] (x=5, 4, 3, 2, 1) in the process further suggested an assembly/disassembly/in situ reaction/reassembly transformation mechanism. These results not only reveal that multiple phase transformations are possible even though they were not realized in the crystalline state, but also help to better understand the complex transformation process between coordination clusters during “black-box” reactions.     

Spin–Orbit Charge-Transfer Intersystem Crossing (ISC) in Compact Electron Donor–Acceptor Dyads: ISC Mechanism and Application as Novel and Potent Photodynamic Therapy Reagents

Spin–orbit charge-transfer intersystem crossing (SOCT-ISC) is useful for the preparation of heavy atom-free triplet photosensitisers (PSs). Herein, a series of perylene-Bodipy compact electron donor/acceptor dyads showing efficient SOCT-ISC is prepared. The photophysical properties of the dyads were studied with steady-state and time-resolved spectroscopies. Efficient triplet state formation (quantum yield Φ_T=60 %) was observed, with a triplet state lifetime (τ_T=436 μs) much longer than that accessed with the conventional heavy atom effect (τ_T=62 μs). The SOCT-ISC mechanism was unambiguously confirmed by direct excitation of the charge transfer (CT) absorption band by using nanosecond transient absorption spectroscopy and time-resolved electron paramagnetic resonance (TREPR) spectroscopy. The factors affecting the SOCT-ISC efficiency include the geometry, the potential energy surface of the torsion, the spin density for the atoms of the linker, solvent polarity, and the energy matching of the ¹CT/³LE states. Remarkably, these heavy atom-free triplet PSs were demonstrated as a new type of efficient photodynamic therapy (PDT) reagents (phototoxicity, EC₅₀=75 nm ), with a negligible dark toxicity (EC₅₀=78.1 μm ) compared with the conventional heavy atom PSs (dark toxicity, EC₅₀=6.0 μm, light toxicity, EC₅₀=4.0 nm ). This study provides in-depth understanding of the SOCT-ISC, unveils the design principles of triplet PSs based on SOCT-ISC, and underlines their application as a new generation of potent PDT reagents.     

Photoinduced Betaine Generation for Efficient Photothermal Energy Conversion

The conversion of solar energy to thermal, chemical, or electrical energy attracts great attention in chemistry and physics. There has been a considerable effort for the efficient extraction of photons throughout the entire solar spectrum. In this work light energy was efficiently harvested by using a long-lived betaine photogenerated from an acridinium-based electron donor–acceptor dyad. The photothermal energy-conversion efficiency of the dyad is significantly enhanced by simultaneous illumination with blue (420–440 nm) and yellow (>480 nm) light in comparison with the sum of the conversion efficiencies for individual illumination with blue or yellow light. The enhanced photothermal effect is due to the photogenerated betaine, which absorbs longer-wavelength light than the dyad, and thus the dyad–betaine combination is promising for efficient photothermal energy conversion. The mechanisms of betaine generation and energy conversion are discussed on the basis of steady-state and transient spectral measurements.     

Enhanced Operational Durability of Thermally Activated Delayed Fluorescence-Based Organic Light-Emitting Diodes with a Triazine Electron Transporter

In organic light-emitting diodes (OLEDs) based on materials that show thermally activated delayed fluorescence (TADF), the internal quantum efficiency of 100 % can be obtained without using phosphorescence-based organometallics that contain rare metals. Therefore, with TADF-based emitters, it is possible to fabricate high-performing OLEDs at a lower cost. However, compared with fluorescence- and phosphorescence-based OLEDs, an understanding of degradation mechanisms in TADF-based OLEDs is still insufficient for future commercialization. In particular, it is widely recognized that the development of electron transport materials is crucial for improving OLED characteristics, especially driving voltages and operational durability. In this study, it was demonstrated that the operational durability of TADF-based OLEDs was greatly improved by introducing a triazine-based material of 2,4,6-tris(1,1′-biphenyl-4-yl)-[1,3,5]triazine (pT2T) as a hole-blocking layer (HBL) compared with a conventional HBL material of 2,4,6-tris(biphenyl-3-yl)-[1,3,5]triazine (T2T). Several experiments were carried out to make the reasons of the improved durability clearer, and attributed the improved durability to the shift of a carrier recombination zone from the emitting layer/HBL interface and the suppressed formation of excited-state quenchers in the pT2T HBL, because of the higher electron mobility of pT2T and the better stability of its radical anion state.     

Irreversible Structural Changes of Copper Hexacyanoferrate Used as a Cathode in Zn-Ion Batteries

The structural changes of copper hexacyanoferrate (CuHCF), a Prussian blue analogue, which occur when used as a cathode in an aqueous Zn-ion battery, are investigated using electron microscopy techniques. The evolution of Zn_xCu_1−xHCF phases possessing wire and cubic morphologies from initial CuHCF nanoparticles are monitored after hundreds of cycles. Irreversible introduction of Zn ions to CuHCF is revealed locally using scanning transmission electron microscopy. A substitution mechanism is proposed to explain the increasing Zn content within the cathode material while simultaneously the Cu content is lowered during Zn-ion battery cycling. The present study demonstrates that the irreversible introduction of Zn ions is responsible for the decreasing Zn ion capacity of the CuHCF cathode in high electrolyte concentration.     

1,2,5,6-Tetrakis(guanidino)-Naphthalenes: Electron Donors,Fluorescent Probes and Redox-Active Ligands

New redox-active 1,2,5,6-tetrakis(guanidino)-naphthalene compounds, isolable and storable in the neutral and deep-green dicationic redox states and oxidisable further in two one-electron steps to the tetracations, are reported. Protonation switches on blue fluorescence, with the fluorescence intensity (quantum yield) increasing with the degree of protonation. Reactions with N-halogenosuccinimides or N-halogenophthalimides led to a series of new redox-active halogeno- and succinimido-/phthalimido-substituted derivatives. These highly selective reactions are proposed to proceed via the tri- or tetracationic state as the intermediate. The derivatives are oxidised reversibly at slightly higher potentials than that of the unsubstituted compounds to dications and further to tri- and tetracations. The integration of redox-active ligands in the transition-metal complexes shifts the redox potentials to higher values and also allows reversible oxidation in two potentially separated one-electron steps.     

Engineering Lithium Ions Embedded in NiFe Layered Double Hydroxide Lattices To Activate Laminated Ni2+ Sites as High-Efficiency Oxygen Evolution Reaction Catalysts

NiFe layered double hydroxides (LDHs) have been denoted as benchmark non-noble-metal electrocatalysts for the oxygen evolution reaction (OER). However, for laminates of NiFe LDHs, the edge sites are active, but the basal plane is inert, leading to underutilization as catalysts for the OER. Herein, for the first time, light and electron-deficient Li ions are intercalated into the basal plane of NiFe LDHs. The results of theoretical calculations and experiments both showed that electrons would be transferred from near Ni²⁺ to the surroundings of Li⁺, resulting in electron-deficient properties of the Ni sites, which would function as “electron-hungry” sites, to enhance surface adsorption of electron-rich oxygen-containing groups, which would enhance the effective activity for the OER. As demonstrated by the catalytic performance, the Li−NiFe LDH electrodes showed an ultralow overpotential of only 298 mV at 50 mA cm⁻², which was lower than that of 347 mV for initial NiFe LDHs and lower than that of 373 mV for RuO₂. Reasonable intercalation adjustment effectively activates laminated Ni²⁺ sites and constructs the electron-deficient structure to enhance its electrocatalytic activity, which sheds light on the functional treatment of catalytic materials.     

Octaboraneyl Complexes of Nickel: Monomers for Redox-Active Coordination Polymers

Herein, we establish the preparation, characterization, and reactivity of a new diphosphine ligand, 1,2-bis(di(3-dicyclohexylboraneyl)propylphosphino)ethane (P₂B^Cy₄), a scaffold that contains four pendant boranes. An entryway into the coordination chemistry of P₂B^Cy₄ is established by using nickel, providing the octaboraneyl complex [Ni(P₂B^Cy₄)₂]—this species contains a boron-rich secondary coordination sphere that reacts readily with Lewis bases. In the case of 4,4′-bipyridine, an air-sensitive coordination polymer is obtained. Characterization of this material by solid-state NMR and EPR spectroscopy reveals the presence of a charge-transfer polymer, which forms as a function of intramolecular Ni→4,4′-bpy electron transfer (ET), providing an array of oxidized nickel sites and reduced 4,4′-bpy radical anion sites. Notably, the related intermolecular reaction between the model fragments [Ni(dnppe)₂] (dnppe=1,2-bis(di-n-propylphosphino)ethane) and a bis(boraneyl)-protected 4,4′-bpy, provides no ET. Overall, the P₂B^Cy₄ fragment provides a unique opportunity for Lewis base activation, in one case allowing for the facile construction of monomers for incorporation into redox-active macromolecules.